Dell Vostro 5471 Ownerss Manual - Page 10
Installing the base cover, Battery, Removing the battery
View all Dell Vostro 5471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing the base cover 1. Align the base cover with the screw holders on the computer. 2. Press the edges of the cover until it clicks into place. 3. Tighten the two M2.5 x 6 screws. 4. Replace the eight M2.5 x 6 screws to secure the base cover to the computer. 5. Follow the procedure in After working inside your computer. Battery Removing the battery 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. To remove the battery: a) Disconnect the battery cable [1] from the connector on the system board. b) Lift the latch and disconnect the hard disk drive cable [2] from the connector on the system board. c) Peel the hard disk drive cable from the battery [3]. 10 Removing and installing components
Installing the base cover
1.
Align the base cover with the screw holders on the computer.
2.
Press the edges of the cover until it clicks into place.
3.
Tighten the two M2.5 x 6 screws.
4.
Replace the eight M2.5 x 6 screws to secure the base cover to the computer.
5.
Follow the procedure in
After working inside your computer
.
Battery
Removing the battery
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
To remove the battery:
a)
Disconnect the battery cable [1] from the connector on the system board.
b)
Lift the latch and disconnect the hard disk drive cable [2] from the connector on the system board.
c)
Peel the hard disk drive cable from the battery [3].
10
Removing and installing components