Dell Vostro 5471 Ownerss Manual - Page 38

DC-in, Removing the DC-in, Installing the DC-in

Get Dell Vostro 5471 PDF manuals and user guides View all Dell Vostro 5471 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

4. Follow the procedure in After working inside your computer. DC-in Removing the DC-in 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) base cover b) WLAN card c) display assembly 3. To remove the DC-in: a) Remove the 3 M2.5 x 6 screws that secure the right display hinge bracket to the system [1]. b) Lift the hinge bracket [2]. c) Disconnect the power-adapter port cable from the connector in the system board [3]. d) Disconnect the DC-in from the system [4]. Installing the DC-in 1. Place and connect the DC-in to its slot in the system. 2. Connect the power-adapter port cable to the connector in the system board. 3. Place the right display hinge and replace the 3 screws to secure the hinge to the system. 4. Install the: a) display assembly 38 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
4.
Follow the procedure in
After working inside your computer
.
DC-in
Removing the DC-in
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a)
base cover
b)
WLAN card
c)
display assembly
3.
To remove the DC-in:
a)
Remove the 3 M2.5 x 6 screws that secure the right display hinge bracket to the system [1].
b)
Lift the hinge bracket [2].
c)
Disconnect the power-adapter port cable from the connector in the system board [3].
d)
Disconnect the DC-in from the system [4].
Installing the DC-in
1.
Place and connect the DC-in to its slot in the system.
2.
Connect the power-adapter port cable to the connector in the system board.
3.
Place the right display hinge and replace the 3 screws to secure the hinge to the system.
4.
Install the:
a)
display assembly
38
Removing and installing components