Dell Vostro 5471 Ownerss Manual - Page 18

WLAN card, Removing the WLAN card

Get Dell Vostro 5471 PDF manuals and user guides View all Dell Vostro 5471 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

WLAN card Removing the WLAN card 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. To remove the WLAN card: a) Remove the M2.0 x 4 screw that secures the WLAN card to the system [1]. b) Remove the tab that secures the WLAN cables [2]. c) Disconnect the WLAN antenna cables from the WLAN card [3]. d) Lift the WLAN card away from the connector [4]. Installing the WLAN card 1. Insert the WLAN card into the slot on the system. 2. Connect the WLAN cables to the connectors on the WLAN Card. 3. Place the bracket and replace the M2.0 x 4 screw to secure it to the system. 4. Install the base cover. 5. Follow the procedure in After working inside your computer. 18 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
WLAN card
Removing the WLAN card
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
To remove the WLAN card:
a)
Remove the M2.0 x 4 screw that secures the WLAN card to the system [1].
b)
Remove the tab that secures the WLAN cables [2].
c)
Disconnect the WLAN antenna cables from the WLAN card [3].
d)
Lift the WLAN card away from the connector [4].
Installing the WLAN card
1.
Insert the WLAN card into the slot on the system.
2.
Connect the WLAN cables to the connectors on the WLAN Card.
3.
Place the bracket and replace the M2.0 x 4 screw to secure it to the system.
4.
Install the
base cover
.
5.
Follow the procedure in
After working inside your computer
.
18
Removing and installing components