Dell Vostro 5471 Ownerss Manual - Page 12
Speaker, Removing the speaker
View all Dell Vostro 5471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3. Connect the hard disk drive cable to the connector on the system board and close the latch. 4. Replace the four M2.0 x 3 screws to secure the battery to the system. 5. Install the base cover. 6. Follow the procedure in After working inside your computer. Speaker Removing the speaker 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) base cover b) battery 3. To remove the speaker: a) Disconnect the speaker cable [1]. b) Unroute the cable from routing channel [2]. 4. Lift the speakers, along with the speaker cable, and remove it away from the back cover. 12 Removing and installing components
3.
Connect the hard disk drive cable to the connector on the system board and close the latch.
4.
Replace the four M2.0 x 3 screws to secure the battery to the system.
5.
Install the
base cover
.
6.
Follow the procedure in
After working inside your computer
.
Speaker
Removing the speaker
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a)
base cover
b)
battery
3.
To remove the speaker:
a)
Disconnect the speaker cable [1].
b)
Unroute the cable from routing channel [2].
4.
Lift the speakers, along with the speaker cable, and remove it away from the back cover.
12
Removing and installing components