Canton musicbox Air 3 Owners Manual - Page 39
Version_XX.fw. - firmware update
View all Canton musicbox Air 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
English Actions General operation of musicbox Air 3. Problems musicbox Air 3 does not respond. Possible causes The musicbox Air 3 has been hung. Solutions 2. Reset the musicbox Air 3, if necessary. Press and hold the RESET button on the back until the LED ring is blinking green rapidly (2x per second). The LED ring is blinking blue. The protection circuit of the musicbox Air 3 has been activated due to an overload (e. g. overtemperature or overcurrent). Switch the musicbox Air 3 into Standby Mode and wait at least 30 minutes. Firmware update over the network (file name: musicboxAir3_ Version_XX.fw). Firmware update over the network or USB (file name: musicboxAir3_ Version_XX.fw). Your web browser's returns a "page load error", the web configuration page is no longer displayed. A new IP address was allocated to the musicbox AIr 3 by your network router. When attempting to select the update file, the error message "invalid file" is returned. Unknown The musicbox Air 3 does not work any longer, all LEDs are off or the LED ring is blinking blue. The update process was interrupted (e.g. loss of electricity) and the update could not be completed. Check your network router for the current IP address of the musicbox Air 3 and enter this into the browser's address bar in order to continue with the update process. Repeat the procedure as before until it can be completed. Leave the musicbox Air 3 connected to the mains for at least 30 minutes. After this time, try performing a firmware update over the network. 39