Canton musicbox Air 3 Owners Manual - Page 36

English Actions Connection using WP SETUP. Manual connection. Problems No connection between router and musicbox Air 3 can be established. The musicbox Air 3 can not be selected as a network and is not displayed as a "wireless" device in the network router's "connected devices" menu. No connection establishment between router and musicbox Air 3. Possible causes 3. The musicbox Air 3 is not in WP SETUP Mode. 1. The WLAN initialisation of the musicbox Air 3 has not been completed. 2. The WLAN adapter of your WLANcompatible device (e.g. notebook) is deactivated. 3. Your WLAN-compatible device is already connected by a network cable. 4. The musicbox Air 3 has not been set into the manual connection mode. You have entered incorrect access data for your network. Solutions 3. Press the WP SETUP button until the LED ring is blinking alternating green and blue. If it blinks blue/red, you've held the button too long. 1. Wait a moment, since the musicbox Air 3 requires up to 60 seconds to initialise the network and to be displayed in the network router. 2. A ctivate the WLAN adapter of your WLAN-enabled device. You may need to refer to the instructions provided with the WLAN device. 3. Remove the network cable. Only a wireless (WLAN) connection is permitted. 4. Press the WP SETUP button on the musicbox Air 3 until the LED ring blinks alternating red and blue. If is blinks green and blue, the button was not pressed long enough. Please ensure that the access data is ­correct and enter the correct data. 36