Adaptec FS4500 User Guide - Page 74
Acoustics, Product Orientation, Ultra320 SCSI Storage Enclosure Technical Specifications, Disk Drives
UPC - 760884144275
View all Adaptec FS4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Technical Specifications Acoustics Acoustic level shall not exceed a weighted sound power of 6.5 Bels at normal operation tested to ISO7779. Normal operation is defined as ambient temperature of 23 ° C, 60 I/O/sec/drive, all fans operational, and no fault conditions. The acoustic sound level will increase under fault conditions. Product Orientation The product can be used in the horizontal or vertical (tower) orientation. Ultra320 SCSI Storage Enclosure Technical Specifications Disk Drives ■ Support for a mix of drives, capacities, and spindle speed (10 K and 15 K rpm). ■ Support for 1.0 inch, hot swap, and direct attach U160 or U320 disk drives. ■ The disk drives are direct connected to the midplane via 80-pin SCA-2 connectors. SCSI Bus The Adaptec U320 SCSI Storage Enclosure features an LVD SCSI interface supporting Ultra320 (320 MB/sec synchronous transfer rate), Ultra160 (160 MB/sec synchronous transfer rate), and Ultra-2 SCSI (80 MB/sec synchronous transfer rate). The Adaptec SCSI bus is not intended to support single-ended drives. SCSI Midplane The Adaptec SCSI Storage Enclosure backplanes contain no active components, apart from terminators, and support hot plugging of disk drives, power supplies, and fans. The backplanes support the full 320 MB/sec bandwidth for each configured bus. The Ultra320 SCSI split bus mode supports the full 320 MB/sec bandwidth for each bus, giving a total aggregate bandwidth of 640 MB/sec. 8-5