Adaptec FS4500 User Guide - Page 23

With assistance from a second person, lift the Storage Enclosure, and, from the front of the rack

Get Adaptec FS4500 - Hard Drive Array PDF manuals and user guides
UPC - 760884144275
View all Adaptec FS4500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Installing the Storage Enclosure 3 Secure the rear rails you selected to the rear supports of the equipment rack, using the supplied screws, as shown in Figure 2-1 on page 2-4. 4 Secure the front rails to the rear rails, as shown in Figure 2-2. Figure 2-2 Securing the Front Rails to the Rear Rails 5 Tighten all the screws before continuing. 6 Carefully remove the rack ear plastic covers from the Storage Enclosure. (They will be re-used.) 7 With assistance from a second person, lift the Storage Enclosure and, from the front of the rack, slide the rear of the enclosure onto the rails. Slide the enclosure all the way back until it rests completely on the rails, as shown in Figure 2-3 on page 2-6. 2-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
2-5
Installing the Storage Enclosure
3
Secure the rear rails you selected to the rear supports of the
equipment rack, using the supplied screws, as shown in
Figure 2-1 on page 2-4
.
4
Secure the front rails to the rear rails, as shown in
Figure 2-2
.
Figure 2-2
Securing the Front Rails to the Rear Rails
5
Tighten all the screws before continuing.
6
Carefully remove the rack ear plastic covers from the Storage
Enclosure. (They will be re-used.)
7
With assistance from a second person, lift the Storage Enclosure
and, from the front of the rack, slide the rear of the enclosure
onto the rails. Slide the enclosure all the way back until it rests
completely on the rails, as shown in
Figure 2-3 on page 2-6
.