Adaptec FS4500 User Guide - Page 26
Step 3, Installing the Drive Carriers, before installation.
UPC - 760884144275
View all Adaptec FS4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installing the Storage Enclosure 5 Slide the enclosure into the tower skin, as shown in Figure 2-6. Figure 2-6 Sliding Storage Enclosure into Tower Skin 6 Replace the front bezel, using the screws removed in Step 3. 7 Install the tower labels at the top and bottom of the tower. Align the holes in the top label with the LEDs on the enclosure. 8 Replace the drive carriers and APCs, if they were removed before installation. The tower assembly installation is complete. Continue with Step 3: Installing the Drive Carriers on page 2-9. 2-8
2-8
Installing the Storage Enclosure
5
Slide the enclosure into the tower skin, as shown in
Figure 2-6
.
Figure 2-6
Sliding Storage Enclosure into Tower Skin
6
Replace the front bezel, using the screws removed in
Step 3
.
7
Install the tower labels at the top and bottom of the tower. Align
the holes in the top label with the LEDs on the enclosure.
8
Replace the drive carriers and APCs, if they were removed
before installation.
The tower assembly installation is complete. Continue with
Step 3:
Installing the Drive Carriers
on page 2-9
.