2012 Yamaha Motorsports RS Viking Professional Owners Manual - Page 71
2012 Yamaha Motorsports RS Viking Professional Manual
Page 71 highlights
Periodic maintenance and adjustment 1 1. Bulb holder cover 1. Do not touch the glass part of the bulb. 4. Unhook the bulb holder by pushing it in, then upward. 7. 8. Bulb type: Halogen bulb Install the bulb holder cover, and then connect the headlight coupler. Close the shroud. ESU12250 Adjusting the headlight beams 1. 2. 1. Bulb holder Open the shroud. Remove the locking pin. 5. 6. Remove the bulb. Install the new bulb, and then hook the bulb holder onto the headlight unit. NOTICE: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. [ECS00621] 1. Locking pin 3. Turn the headlight beam adjusting screws in or out to adjust the headlight beams. The headlight beams move as follows depending on the turning direction of the headlight beam adjusting screws. G Direction (a): Down and to the left G Direction (b): Up and to the right G Direction (c): Down and to the right G Direction (d): Up and to the left 65