2012 Yamaha Motorsports RS Viking Professional Owners Manual - Page 17
2012 Yamaha Motorsports RS Viking Professional Manual
Page 17 highlights
Control functions After the engine is started, the tachometer makes one sweep, and the low coolant temperature indicator light, the warning light, and all segments of the meter display come on and go off. To reset the tripmeter, push the select/reset button for at least one second while the tripmeter is displayed. TIP To switch the speedometer, odometer, and tripmeter displays between kilometers and miles, select the odometer mode "ODO", and then push the select/reset button for at least 10 seconds while the snowmobile is stopped. ESU10410 2 3 4 5 6 High beam indicator light " 1 1. Tachometer 2. Low coolant temperature indicator light " " 3. High beam indicator light " " 4. Warning light " " 5. Meter display 6. Select/reset button " The high beam indicator light comes on when the high beams of the headlights are switched on. (See page 15 for headlight beam switch operation.) The grip warmer level is initially displayed for 5 seconds, then the display switches to the fuel meter. Odometer and tripmeter modes Pushing the select/reset button switches the display between the odometer mode "ODO" and the tripmeter mode "TRIP" in the following order: ODO → TRIP → ODO 1. High beam indicator light " ESU10482 " Low coolant temperature indicator light " " The low coolant temperature indicator light comes on when the coolant temperature is low and informs the rider that the snowmobile should be warmed up. After the engine is started, warm it up until the indicator light goes off. 1 1. Odometer/tripmeter 11