2012 Yamaha Motorsports Apex SE Owners Manual - Page 58

2012 Yamaha Motorsports Apex SE Manual

Get 2012 Yamaha Motorsports Apex SE PDF manuals and user guides View all 2012 Yamaha Motorsports Apex SE manuals

Page 58 highlights

Periodic maintenance and adjustment 3. Loosen the quick fastener screws. To install the top cover 1. Connect the main switch coupler and auxiliary DC jack coupler. 2. Place the top cover in the original position, making sure to fit the projections on the cover into the slots in the headlight unit. 1. Quick fastener screw 2. Top cover 1 4. Lift up the rear of the top cover, disconnect the main switch coupler and the auxiliary DC jack coupler, and then remove the cover. 1 1. Top cover 3. 4. 2 Tighten the quick fastener screws. Pass the brake hose, throttle cable, parking brake cable and wire harness through the cable guide, place the cable guide in the original position, and then install the screws. 1 1. Top cover 2. Main switch coupler 1 2 1. Cable guide 5. Install the left side cover and the shroud. ECS00372 NOTICE 1. Top cover 2. Auxiliary DC jack coupler G Make sure that all cables, hoses and leads are routed properly before installing the shroud and covers. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Periodic maintenance and adjustment
52
3.
Loosen the quick fastener screws.
4.
Lift up the rear of the top cover, discon-
nect the main switch coupler and the aux-
iliary DC jack coupler, and then remove
the cover.
To install the top cover
1.
Connect the main switch coupler and
auxiliary DC jack coupler.
2.
Place the top cover in the original posi-
tion, making sure to fit the projections on
the cover into the slots in the headlight
unit.
3.
Tighten the quick fastener screws.
4.
Pass the brake hose, throttle cable, park-
ing brake cable and wire harness through
the cable guide, place the cable guide in
the original position, and then install the
screws.
5.
Install the left side cover and the shroud.
NOTICE
ECS00372
●
Make sure that all cables, hoses and
leads are routed properly before install-
ing the shroud and covers.
1.
Quick fastener screw
2.
Top cover
1.
Top cover
2.
Main switch coupler
1.
Top cover
2.
Auxiliary DC jack coupler
1
2
2
1
1.
Top cover
1.
Cable guide
1
1