2011 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 88
2011 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 88 highlights
EWB02340 3 1 2 3 4 5 6 7 8 9 10 11 1. 2. 3. 4. Screw Gasket Tailpipe Spark arrester 1 2 WARNING Do not start the engine when cleaning the spark arrester, otherwise it could cause injury to the eyes, burns, carbon monoxide poisoning, possibly leading to death, and start a fire. Always let the exhaust system cool prior to touching exhaust components. EBU30060 4 V-belt case drain screw After riding in water deep enough to allow it to enter the V-belt case, remove this screw to drain the water from the case. 4. Insert the tailpipe into the muffler and align the screw holes. 5. Check the gaskets for damage, and replace them if necessary. 6. Install the screws and their gasket, and then tighten the screws to the specified torque. Tightening torque: Tailpipe screw: 7 Nm (0.7 m·kgf, 5.1 ft·lbf) 8-23 TIP If water drains from the V-belt case after removing the screw, have a Yamaha dealer check the ATV as the water may affect other engine parts.