2011 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 100
2011 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 100 highlights
the drive chain slack within the specified limits.[ECB00542] 1 2 3 4 5 Tightening torques: Chain adjusting bolt locknut: 16 Nm (1.6 m·kgf, 12 ft·lbf) Axle holding bolt (upper): 85 Nm (8.5 m·kgf, 61 ft·lbf) Axle holding bolt (lower): 60 Nm (6.0 m·kgf, 43 ft·lbf) ECB00550 1 6 7 8 9 10 11 (b) 2 (a) NOTICE If measurement "A" of the drive chain adjusting bolt is less than 27 mm (1.06 in), have a Yamaha dealer replace the drive chain. 1. Locknut 2. Drive chain slack adjusting bolt 5. Tighten the locknut and the axle holding bolts to the specified torques. 1 1. Measurement A 8-35
8-35
1
2
3
4
5
6
7
8
9
10
11
the drive chain slack within the specified
limits.
[ECB00542]
5.
Tighten the locknut and the axle holding bolts
to the specified torques.
NOTICE
ECB00550
If measurement “A” of the drive chain adjust-
ing bolt is less than 27 mm (1.06 in), have a
Yamaha dealer replace the drive chain.
1. Locknut
2. Drive chain slack adjusting bolt
1
2
(a)
(b)
Tightening torques:
Chain adjusting bolt locknut:
16 Nm (1.6 m·kgf, 12 ft·lbf)
Axle holding bolt (upper):
85 Nm (8.5 m·kgf, 61 ft·lbf)
Axle holding bolt (lower):
60 Nm (6.0 m·kgf, 43 ft·lbf)
1. Measurement A
1