2011 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 76
2011 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 76 highlights
check the oil level. 1 2 3 4 5 6 7 8 9 10 11 1. Maximum level mark 2. Minimum level mark then tighten the engine oil filler cap. 1 2 To change the engine oil 1. Place the ATV on a level surface. 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Place an oil pan under the engine to collect the used oil. 4. Remove the engine oil filler cap, and then remove the engine oil drain bolt to drain the oil from the crankcase. NOTICE: When removing the engine oil drain bolt, the compression spring, oil strainer and O-ring will fall out. Take care not to lose these parts.[ECB00311] TIP The engine oil should be between the minimum and maximum level marks. 5. If the engine oil is at or below the minimum level mark, add sufficient oil of the recommended type to raise it to the correct level. NOTICE: Be sure the engine oil is at the correct level, otherwise engine damage may result.[ECB00851] 6. Insert the dipstick into the oil filler hole, and 8-11