2011 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 109
2011 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 109 highlights
EBU25263 Replacing the fuse ing a fuse. 2. Remove the blown fuse, and then install a new fuse of the specified amperage. WARNING! Always use a fuse of the specified rating, and never use a substitute object in place of the proper fuse. An improper fuse or a substitute object can cause damage to the electrical system, which could lead to a fire.[EWB02172] Specified fuse: 15.0 A 1 2 3 4 5 6 7 8 9 EBU25481 2 1 1. Fuse 2. Spare fuse 3. Turn the key to "ON" and turn on the electrical circuits to check if the devices operate. 4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. The fuse holder is located on the right side of the ATV. If the fuse is blown, replace it as follows. 1. Turn the key to "OFF" and turn off all electrical circuits. ECB00640 Replacing a headlight bulb If a headlight bulb burns out, replace it as follows. 1. Remove the cover at the rear of the headlight by pulling it off. 10 11 NOTICE To prevent accidental short-circuiting, turn off the main switch when checking or replac8-44