2011 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 77

2011 Yamaha Motorsports Grizzly 125 Automatic Manual

Get 2011 Yamaha Motorsports Grizzly 125 Automatic PDF manuals and user guides View all 2011 Yamaha Motorsports Grizzly 125 Automatic manuals

Page 77 highlights

Tightening torque: Engine oil drain bolt: 32 Nm (3.2 m·kgf, 23 ft·lbf) 1 2 3 4 5 6 7 8 9 10 11 1 8. Refill with the specified amount of the recommended engine oil, and then install and tighten the engine oil filler cap. 4 3 1. 2. 3. 4. Engine oil drain bolt O-ring Spring Oil strainer 2 1 Recommended oil: See page 10-1. Oil quantity: 1.25 L (1.32 US qt, 1.10 Imp.qt) TIP Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. ECB00330 5. Clean the oil strainer with solvent. 6. Check the O-ring for damage and replace it if necessary. 7. Install the oil strainer, compression spring, Oring and engine oil drain bolt. Tighten the engine oil drain bolt to the specified torque. NOTICE: Before installing the engine oil drain bolt, be sure to install the O-ring, compression spring and oil strainer.[ECB00321] 8-12 NOTICE G G Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. Make sure that no foreign material enters the crankcase. 9. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
8-12
1
2
3
4
5
6
7
8
9
10
11
5.
Clean the oil strainer with solvent.
6.
Check the O-ring for damage and replace it if
necessary.
7.
Install the oil strainer, compression spring, O-
ring and engine oil drain bolt. Tighten the en-
gine oil drain bolt to the specified torque.
NOTICE:
Before installing the engine oil
drain bolt, be sure to install the O-ring,
compression spring and oil strainer.
[ECB00321]
8.
Refill with the specified amount of the recom-
mended engine oil, and then install and tight-
en the engine oil filler cap.
TIP
Be sure to wipe off spilled oil on any parts after the
engine and exhaust system have cooled down.
NOTICE
ECB00330
●
Do not use oils with a diesel specification of
“CD” or oils of a higher quality than speci-
fied. In addition, do not use oils labeled “EN-
ERGY CONSERVING II” or higher.
●
Make sure that no foreign material enters the
crankcase.
9.
Start the engine, and then let it idle for several
minutes while checking it for oil leakage. If oil
1. Engine oil drain bolt
2. O-ring
3. Spring
4. Oil strainer
1
4
3
2
1
Tightening torque:
Engine oil drain bolt:
32 Nm (3.2 m·kgf, 23 ft·lbf)
Recommended oil:
See page 10-1.
Oil quantity:
1.25 L (1.32 US qt, 1.10 Imp.qt)