2011 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 79
2011 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 79 highlights
1 2 1 8. Install the transmission oil filler bolt and its gasket, and then tighten the bolt to the specified torque. Tightening torque: Transmission oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) To change the transmission oil 1. Place the ATV on a level surface. 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Place an oil pan under the transmission to collect the used oil. 4. Remove the transmission oil filler bolt, the transmission oil drain bolt and their gasket to drain the oil from the transmission case. 1 2 3 4 5 6 7 8 9 10 11 1. Transmission oil filler bolt 2. Gasket 5. Pour the recommended type of oil in the transmission oil filler hole until it flows out of the check screw hole. 6. Tighten the oil check screw to the specified torque. Tightening torque: Transmission oil check screw: 16 Nm (1.6 m·kgf, 12 ft·lbf) 7. Check the oil filler bolt gasket for damage, and replace it if necessary. 8-14