2011 Yamaha Motorsports Apex Owners Manual - Page 82

2011 Yamaha Motorsports Apex Manual

Page 82 highlights

Periodic maintenance and adjustment 1 2 away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. [ECS00621] 1. Screw 2. Headlight access panel 1 6. 7. Disconnect the headlight coupler. Remove the bulb holder cover. 1. Do not touch the glass part of the bulb. 1 Bulb type: Halogen bulb 10. Install the bulb holder cover, and then connect the headlight coupler. 11. Install the headlight access panel. 12. Connect the headlight unit couplers, and then install the plastic band. 13. Install the headlight unit, making sure to fit the slots on its bottom over the projections on its stay. 2 1. Headlight coupler 2. Bulb holder cover 8. Unhook the bulb holder, and then remove the burnt-out bulb. 1 1 2 1. Bulb holder 1. Slot 2. Projection 9. Install the new bulb, and then hook the bulb holder onto the headlight unit. NOTICE: Keep oil and your hands 14. Fit the weatherstrip on the headlight unit into the recess in the top of the air filter case cover. 76

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

Periodic maintenance and adjustment
76
6.
Disconnect the headlight coupler.
7.
Remove the bulb holder cover.
8.
Unhook the bulb holder, and then remove
the burnt-out bulb.
9.
Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE:
Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
[ECS00621]
10. Install the bulb holder cover, and then
connect the headlight coupler.
11.
Install the headlight access panel.
12.
Connect the headlight unit couplers, and
then install the plastic band.
13.
Install the headlight unit, making sure to
fit the slots on its bottom over the projec-
tions on its stay.
14.
Fit the weatherstrip on the headlight unit
into the recess in the top of the air filter
case cover.
1. Screw
2.
Headlight access panel
1.
Headlight coupler
2.
Bulb holder cover
1.
Bulb holder
2
1
2
1
1
1.
Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
1. Slot
2. Projection
1
1
2