2011 Yamaha Motorsports Apex Owners Manual - Page 39
2011 Yamaha Motorsports Apex Manual
Page 39 highlights
Control functions 1 Min 3 Max 4 TIP Make sure that the special wrench is securely fitted on the locknut. 1 2 1. 2. 3. 4. 5. 5 Special wrench corner Control rod adjuster Scale range Special wrench Control rod length 1. Special wrench TIP Use the special wrench in the owner's tool kit to make this adjustment. 2. 3. Loosen the locknut. To increase weight transfer, turn the adjuster in direction (a), and to decrease weight transfer, turn it in direction (b). WARNING! Never adjust the control rod beyond the range of the scale on the special wrench, otherwise the control rod could be damaged, which could lead to an accident or injury. [EWS00181] Locknut tightening torque: 35 Nm (3.5 m·kgf, 25 ft·lbf) RX10PXT EWS00770 WARNING The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. 1. Loosen the locknut while holding the adjusting nut. 1. Locknut 2. Control rod adjuster 4. Tighten the locknut while holding the adjuster in place. 33