2011 Yamaha Motorsports Apex Owners Manual - Page 65

2011 Yamaha Motorsports Apex Manual

Get 2011 Yamaha Motorsports Apex PDF manuals and user guides View all 2011 Yamaha Motorsports Apex manuals

Page 65 highlights

Periodic maintenance and adjustment 8. Remove the oil filler cap, and then remove the engine oil drain bolt and its gasket to drain the oil from the oil tank. Tightening torques: Engine oil drain bolt (crankcase): 30 Nm (3.0 m·kgf, 22 ft·lbf) Engine oil drain bolt (oil tank): 16 Nm (1.6 m·kgf, 12 ft·lbf) 12. Add 2.0 L (2.11 US qt, 1.76 Imp.qt) of the recommended engine oil to the oil tank, and then install and tighten the oil filler cap. 13. Start the engine, warm it up for several minutes, and then turn it off. 14. Remove the oil filler cap, and then add sufficient oil of the recommended type to raise it to the "H" level mark on the dipstick. (See above for checking procedures.) NOTICE: When adding the engine oil, be careful not to fill above the "H" level mark on the dipstick. Use only the recommended oil. (See page 88.) Make sure that no foreign material enters the engine oil tank. [ECS00462] 2 1 1. Engine oil drain bolt (oil tank) 2. Gasket 9. Place an oil pan under the engine to collect the used oil. 10. Remove the engine oil drain bolt and its gasket to drain the oil from the crankcase. 1 2 1. Engine oil drain bolt (crankcase) 2. Gasket TIP Dispose of used oil according to local regulations. 11. Install the engine oil drain bolts and their new gasket, and then tighten the bolts to the specified torques. 1. "H" level mark 2. "L" level mark Recommended engine oil: See page 88. Oil quantity: With oil filter cartridge replacement: 3.0 L (3.17 US qt, 2.64 Imp.qt) Without oil filter cartridge replacement: 2.8 L (2.96 US qt, 2.46 Imp.qt) Total amount: 3.8 L (4.02 US qt, 3.34 Imp.qt) 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Periodic maintenance and adjustment
59
8.
Remove the oil filler cap, and then re-
move the engine oil drain bolt and its gas-
ket to drain the oil from the oil tank.
9.
Place an oil pan under the engine to col-
lect the used oil.
10.
Remove the engine oil drain bolt and its
gasket to drain the oil from the crank-
case.
TIP
Dispose of used oil according to local regula-
tions.
11.
Install the engine oil drain bolts and their
new gasket, and then tighten the bolts to
the specified torques.
12.
Add 2.0 L (2.11 US qt, 1.76 Imp.qt) of the
recommended engine oil to the oil tank,
and then install and tighten the oil filler
cap.
13. Start the engine, warm it up for several
minutes, and then turn it off.
14. Remove the oil filler cap, and then add
sufficient oil of the recommended type to
raise it to the “H” level mark on the dip-
stick. (See above for checking proce-
dures.)
NOTICE:
When adding the
engine oil, be careful not to fill above
the “H” level mark on the dipstick. Use
only the recommended oil. (See page
88.) Make sure that no foreign material
enters the engine oil tank.
[ECS00462]
1.
Engine oil drain bolt (oil tank)
2. Gasket
1.
Engine oil drain bolt (crankcase)
2. Gasket
1
2
1
2
Tightening torques:
Engine oil drain bolt (crankcase):
30 Nm (3.0 m·kgf, 22 ft·lbf)
Engine oil drain bolt (oil tank):
16 Nm (1.6 m·kgf, 12 ft·lbf)
1.
“H” level mark
2.
“L” level mark
Recommended engine oil:
See page 88.
Oil quantity:
With oil filter cartridge replacement:
3.0 L (3.17 US qt, 2.64 Imp.qt)
Without oil filter cartridge replace-
ment:
2.8 L (2.96 US qt, 2.46 Imp.qt)
Total amount:
3.8 L (4.02 US qt, 3.34 Imp.qt)