2011 Yamaha Motorsports Apex Owners Manual - Page 18
2011 Yamaha Motorsports Apex Manual
Page 18 highlights
Control functions TIP G G To switch the speedometer, odometer, and tripmeter displays between kilometers and miles, select the odometer mode "ODO", and then push the "SELECT" button for at least 10 seconds while the snowmobile is stopped. To switch the barometer display between hectopascal "hPa" and inches of mercury "inHg", select the barometer mode "BARO", and then push the "SELECT" button for at least 3 seconds while the snowmobile is stopped. F-TRIP → ODO → TRIP A → TRIP B → BARO →F-TRIP To reset a tripmeter, select it by pushing the "SELECT" button, and then push the "RESET" button for at least 1 second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically, and the display will return to the prior mode after the snowmobile has been refueled and traveled 5 km (3 mi). Oil change tripmeter When the periodic oil change interval is reached at the initial 800 km (500 mi), then at every 4000 km (2500 mi) thereafter, the oil change tripmeter and "OIL" flash alternately in the odometer display, and the tripmeter starts counting the distance traveled from that point. When this occurs, change the engine oil as soon as possible. (See page 56 for the oil change procedure.) E LO Odometer, tripmeter, and barometer modes 1 1. Odometer/tripmeter/barometer Pushing the "SELECT" button switches the display between the odometer mode "ODO", tripmeter modes "TRIP A" and "TRIP B", and barometer mode "BARO" in the following order: ODO → TRIP A → TRIP B → BARO → ODO If the fuel level warning indicator and the warning light come on (see page 14), the odometer display will automatically change to the fuel reserve tripmeter mode "F-TRIP" and start counting the distance traveled from that point. In that case, push the "SELECT" button to switch the display between the various tripmeter and odometer modes in the following order: TIP G G The oil change tripmeter will flash only when the snowmobile is stopped. To return to the previous display mode, push the "SELECT" button. To display the oil change tripmeter again, turn the key to the off position, then back to the on position. After changing the engine oil, reset the oil change tripmeter as follows. 12