2011 Yamaha Motorsports Apex Owners Manual - Page 24
2011 Yamaha Motorsports Apex Manual
Page 24 highlights
Control functions 2 3 1 1. Electric power steering warning indicator "EPS" TIP If the steering load is too heavy (i.e., excessive steering use when the snowmobile is traveling at a slow speed), the power assist is reduced to protect the EPS motor from overheating. ESU13365 1. Warning light " " 2. Engine trouble warning indicator " 3. Error code display ESU10531 " Engine stop switch " " The engine stop switch is used to stop the engine in an emergency. Simply push the stop switch to stop the engine. To start the engine, pull the stop switch and proceed with starting the engine. (See page 37 for engine starting procedures.) Self-diagnosis device This model is equipped with a self-diagnosis device for various electrical circuits. If a problem is detected in any of those circuits, the warning light and the engine trouble warning indicator flash, and an error code displays in the meter display. Note the error code, and then have a Yamaha dealer inspect the snowmobile as soon as possible. NOTICE: Do not continue to operate the engine longer than necessary if there is an error code to avoid possible engine damage. [ECS00820] 1. Engine stop switch " " During the first few rides, practice using the stop switch so that you can react quickly in an emergency. ESU10661 Headlight beam switch "LIGHTS" Push the headlight beam switch to change the headlight to high beam "HI" or to low beam "LO". 18