2010 Yamaha Motorsports TMAX Owners Manual - Page 68

2010 Yamaha Motorsports TMAX Manual

Get 2010 Yamaha Motorsports TMAX PDF manuals and user guides View all 2010 Yamaha Motorsports TMAX manuals

Page 68 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT EAU22392 Checking the front and rear brake pads 1 2 3 4 5 6 7 1. Wear indicator point that the wear indicator almost touches the brake disc, have a Yamaha dealer replace the brake pads as a set. EAU22493 stalling the bolts, then tightening them to the specified torque. Tightening torque: Brake caliper bolt: 40 Nm (4.0 m·kgf, 28.9 ft·lbf) ECA12822 The front and rear brake pads must be checked for wear at the intervals specified in the periodic maintenance and lubrication chart. EAU22410 Rear brake pads 1. Remove the rear brake caliper by removing the bolts. Front brake pads 1 NOTICE Do not apply the rear brake or rear brake lock after the brake caliper has been removed, otherwise the brake caliper piston will be forced out. 2 1 1. Brake caliper bolt 2. Lining thickness 8 9 Each front brake pad is provided with a wear indicator, which allows you to check the brake pad wear without having to disassemble the brake. To check the brake pad wear, check the position of the wear indicator while applying the brake. If a brake pad has worn to the 2. Check each rear brake pad for damage and measure the lining thickness. If a brake pad is damaged or if the lining thickness is less than 0.8 mm (0.03 in), have a Yamaha dealer replace the brake pads as a set. 3. Install the rear brake caliper by in7-23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
PERIODIC MAINTENANCE AND ADJUSTMENT
7-23
1
2
3
4
5
6
7
8
9
EAU22392
Checking the front and rear
brake pads
The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
EAU22410
Front brake pads
Each front brake pad is provided with a
wear indicator, which allows you to
check the brake pad wear without hav-
ing to disassemble the brake. To check
the brake pad wear, check the position
of the wear indicator while applying the
brake. If a brake pad has worn to the
point that the wear indicator almost
touches the brake disc, have a Yamaha
dealer replace the brake pads as a set.
EAU22493
Rear brake pads
1. Remove the rear brake caliper by
removing the bolts.
2. Check each rear brake pad for
damage and measure the lining
thickness. If a brake pad is dam-
aged or if the lining thickness is
less than 0.8 mm (0.03 in), have a
Yamaha dealer replace the brake
pads as a set.
3. Install the rear brake caliper by in-
stalling the bolts, then tightening
them to the specified torque.
NOTICE
ECA12822
Do not apply the rear brake or rear
brake lock after the brake caliper
has been removed, otherwise the
brake caliper piston will be forced
out.
1.
Wear indicator
1
1.
Brake caliper bolt
2.
Lining thickness
1
2
Tightening torque:
Brake caliper bolt:
40 Nm (4.0 m
·
kgf, 28.9 ft
·
lbf)