2010 Yamaha Motorsports TMAX Owners Manual - Page 62
2010 Yamaha Motorsports TMAX Manual
Page 62 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT er by removing the screw. 1 1 2 3 2 3 4 5 6 7 8 9 1. Maximum level mark 2. Minimum level mark 3. Coolant level check window 1 1. Coolant reservoir cover 2. Screw 2 wise the cooling system will not be protected against frost and corrosion. If water has been added to the coolant, have a Yamaha dealer check the antifreeze content of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced.[ECA10472] 1 3. If the coolant is at or below the minimum level mark, lift up the right floorboard mat as shown. 1 1. Right floorboard mat 4. Remove the coolant reservoir cov- 5. Open the coolant reservoir cap, add coolant to the maximum level mark, and then close the reservoir cap. WARNING! Remove only the coolant reservoir cap. Never attempt to remove the radiator cap when the engine is hot.[EWA15161] NOTICE: If coolant is not available, use distilled water or soft tap water instead. Do not use hard water or salt water since it is harmful to the engine. If water has been used instead of coolant, replace it with coolant as soon as possible, other7-17 1. Coolant reservoir cap Coolant reservoir capacity (up to the maximum level mark): 0.25 L (0.26 US qt, 0.22 Imp.qt) 6. Install the coolant reservoir cover by installing the screw. 7. Place the right floorboard mat in the original position.