2010 Yamaha Motorsports TMAX Owners Manual - Page 56

2010 Yamaha Motorsports TMAX Manual

Get 2010 Yamaha Motorsports TMAX PDF manuals and user guides View all 2010 Yamaha Motorsports TMAX manuals

Page 56 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT Before installing a spark plug, the spark plug gap should be measured with a wire thickness gauge and, if necessary, adjusted to specification. 1 2 3 4 5 6 7 8 9 This model is equipped with a canister to prevent the discharging of fuel vapor into the atmosphere. Before operating this vehicle, make sure to check the following: G Check each hose connection. G Check each hose and canister for cracks or damage. Replace if damaged. G Make sure that the canister breather is not blocked, and if necessary, clean it. installing a spark plug, a good estimate of the correct torque is 1/4-1/2 turn past finger tight. However, the spark plug should be tightened to the specified torque as soon as possible. EAU36110 Canister 1. Spark plug gap Spark plug gap: 0.7-0.8 mm (0.028-0.031 in) Clean the surface of the spark plug gasket and its mating surface, and then wipe off any grime from the spark plug threads. Tightening torque: Spark plug: 12.5 Nm (1.25 m·kgf, 9 ft·lbf) TIP If a torque wrench is not available when 7-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
PERIODIC MAINTENANCE AND ADJUSTMENT
7-11
1
2
3
4
5
6
7
8
9
Before installing a spark plug, the spark
plug gap should be measured with a
wire thickness gauge and, if necessary,
adjusted to specification.
Clean the surface of the spark plug
gasket and its mating surface, and then
wipe off any grime from the spark plug
threads.
TIP
If a torque wrench is not available when
installing a spark plug, a good estimate
of the correct torque is 1/4
–
1/2 turn
past finger tight. However, the spark
plug should be tightened to the speci-
fied torque as soon as possible.
EAU36110
Canister
This model is equipped with a canister
to prevent the discharging of fuel vapor
into the atmosphere. Before operating
this vehicle, make sure to check the fol-
lowing:
±
Check each hose connection.
±
Check each hose and canister for
cracks or damage. Replace if
damaged.
±
Make sure that the canister breath-
er is not blocked, and if necessary,
clean it.
1.
Spark plug gap
Spark plug gap:
0.7
–
0.8 mm (0.028
–
0.031 in)
Tightening torque:
Spark plug:
12.5 Nm (1.25 m
·
kgf, 9 ft
·
lbf)