2010 Yamaha Motorsports TMAX Owners Manual - Page 59

2010 Yamaha Motorsports TMAX Manual

Get 2010 Yamaha Motorsports TMAX PDF manuals and user guides View all 2010 Yamaha Motorsports TMAX manuals

Page 59 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT 1 Recommended engine oil: See page 9-1. Oil quantity: Without oil filter cartridge replacement: 2.80 L (2.96 US qt, 2.46 Imp.qt) With oil filter cartridge replacement: 2.90 L (3.07 US qt, 2.55 Imp.qt) 1 2 3 4 5 6 7 8 9 1. O-ring 1. Torque wrench TIP Make sure that the O-ring is properly seated. 8. Install the new oil filter cartridge, and then tighten it to the specified torque with a torque wrench. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12.3 ft·lbf) TIP Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. ECA11620 9. Install the engine oil drain bolt and its new gasket, and then tighten the bolt to the specified torque. Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31.1 ft·lbf) 10. Refill with the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. NOTICE G In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. G Make sure that no foreign material enters the crankcase. 7-14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
PERIODIC MAINTENANCE AND ADJUSTMENT
7-14
2
3
4
5
6
7
8
9
TIP
Make sure that the O-ring is properly
seated.
8. Install the new oil filter cartridge,
and then tighten it to the specified
torque with a torque wrench.
9. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
10. Refill with the specified amount of
the recommended engine oil, and
then install and tighten the oil filler
cap.
TIP
Be sure to wipe off spilled oil on any
parts after the engine and exhaust sys-
tem have cooled down.
NOTICE
ECA11620
±
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel speci-
fication of
“
CD
”
or oils of a high-
er quality than specified. In
addition, do not use oils labeled
“
ENERGY CONSERVING II
”
or
higher.
±
Make sure that no foreign mate-
rial enters the crankcase.
1. O-ring
1
1.
Torque wrench
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m
·
kgf, 12.3 ft
·
lbf)
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m
·
kgf, 31.1 ft
·
lbf)
1
Recommended engine oil:
See page 9-1.
Oil quantity:
Without oil filter cartridge replace-
ment:
2.80 L (2.96 US qt, 2.46 Imp.qt)
With oil filter cartridge replacement:
2.90 L (3.07 US qt, 2.55 Imp.qt)