2010 Yamaha Motorsports TMAX Owners Manual - Page 34
2010 Yamaha Motorsports TMAX Manual
Page 34 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU14341 Helmet holder 1 1 2 3 4 5 6 7 8 9 holder, since the helmet may hit objects, causing loss of control and possibly an accident.[EWA10161] To release the helmet from the helmet holder Open the seat, remove the helmet holding cable from the helmet holder and the helmet, and then close the seat. 1 2 1. Rider backrest 2. Bolt 3. Slide the backrest forward or backward to the desired position. 4. Install and securely tighten the backrest bolts. 5. Close the seat. 1. Helmet holder The helmet holder is located under the seat. A helmet holding cable is provided beside the owner's tool kit to secure a helmet to the helmet holder. To secure a helmet to the helmet holder 1. Open the seat. (See page 4-14.) 2. Pass the helmet holding cable through the buckle on the helmet strap as shown, and then hook the cable loop over the helmet holder. 3. Securely close the seat. WARNING! Never ride with a helmet attached to the helmet 4-15