2010 Yamaha Motorsports TMAX Owners Manual - Page 25
2010 Yamaha Motorsports TMAX Manual
Page 25 highlights
INSTRUMENT AND CONTROL FUNCTIONS Trip → V-BELT Trip → Odo Oil change indicator "OIL" 1 1 1. Fuel reserve tripmeter 1. Oil change indicator "OIL" To reset a tripmeter, select it by pushing the "SELECT" button until "F Trip", "Trip-A" or "Trip-B" is displayed. While "F Trip", "Trip-A" or "Trip-B" is displayed, push the "RESET" button for at least one second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically and the display will return to the prior mode after refueling and traveling 5 km (3 mi). TIP The display cannot be changed back to "F Trip" after pushing the "RESET" button. This indicator flashes at the initial 1000 km (600 mi), then at 5000 km (3125 mi) and every 5000 km (3125 mi) thereafter to indicate that the engine oil should be changed. After changing the engine oil, reset the oil change indicator. To reset the oil change indicator, select it by pushing the "SELECT" button until "OIL Trip" is displayed, and then push the "RESET" button at least 1 second. When pushing the "RESET" button, "OIL Trip" starts flashing. While "OIL Trip" is flashing, push the "RESET" button for at least 3 seconds. If the engine oil is changed before the 4-6 oil change indicator "OIL" flashes (i.e. before the periodic oil change interval has been reached), the indicator "OIL" must be reset after the oil change for the next periodic oil change to be indicated at the correct time. The electrical circuit of the indicator can be checked according to the following procedure. 1. Set the engine stop switch to " " and turn the key to "ON". 2. Check that the oil change indicator comes on for a few seconds and then goes off. 3. If the oil change indicator does not come on, have a Yamaha dealer check the electrical circuit. 2 3 4 5 6 7 8 9