2009 Yamaha Motorsports RS Vector GT Owners Manual - Page 66
2009 Yamaha Motorsports RS Vector GT Manual
Page 66 highlights
Periodic maintenance and adjustment 6. Recheck alignment and deflection. If necessary, repeat steps 3 to 5 until the proper adjustment is achieved. Tighten the rear axle nut. Rear axle nut tightening torque: 75 Nm (7.5 m·kgf, 54 ft·lbf) EWS00511 WARNING Do not grease the throttle cable because it could become frozen, which could cause loss of control. Apply a dab of grease onto the cable end only. Lubricants: Brake lever: Silicone grease Other lubrication points: Low-temperature grease 7. Slide runners Check the slide runners for wear and damage. If the slide runners reach the wear limit, they should be replaced. 1 1. Slide runner 2. Wear limit height 1. Lubrication point Slide runner wear limit height: 10.5 mm (0.41 in) ECS00350 NOTICE Ride on fresh snow frequently. Operating on ice or hard-packed snow will rapidly wear the slide runners. ESU12193 Lubrication Lubricate the following points with the specified grease. 1. Throttle cable end 60