2009 Yamaha Motorsports RS Vector GT Owners Manual - Page 64
2009 Yamaha Motorsports RS Vector GT Manual
Page 64 highlights
Periodic maintenance and adjustment Adjust or replace if necessary. (See the following section for more details.) 1. Drive track deflection Measuring the drive track deflection 1. Lay the snowmobile on its side. 2. Measure the drive track deflection with a spring scale. Pull at the center of the drive track with a force of 100 N (10 kgf, 22 lbf). 3. Standard drive track deflection: RS90GT 30.0-35.0 mm (1.18-1.38 in) RS90LT 25.0-30.0 mm (0.98-1.18 in) RS90LTGT 25.0-30.0 mm (0.98-1.18 in) RS90R 30.0-35.0 mm (1.18-1.38 in) If the deflection is incorrect, adjust the drive track. Adjusting the drive track 1. Lift the rear of the snowmobile onto a suitable stand to raise the drive track off the ground. 2. Loosen the rear axle nut. 1. Spring scale TIP Measure the gap between the slide runner and the edge of the track window. Measure both sides. 1. Rear axle nut 3. 4. Start the engine and rotate the drive track one or two turns. Stop the engine. Check the drive track alignment with the slide runners. If the alignment is incorrect, align the drive track by turning the left and right adjusting nuts. 58