2009 Yamaha Motorsports RS Vector GT Owners Manual - Page 59

2009 Yamaha Motorsports RS Vector GT Manual

Get 2009 Yamaha Motorsports RS Vector GT PDF manuals and user guides View all 2009 Yamaha Motorsports RS Vector GT manuals

Page 59 highlights

Periodic maintenance and adjustment 9. Rotate the secondary sliding sheave clockwise and push it so that it separates from the secondary fixed sheave. 1. Dipstick 4. 1. Secondary sliding sheave 2. Secondary fixed sheave 10. Install the V-belt between the secondary sliding and fixed sheaves. Remove the dipstick and check that the oil is between the maximum and minimum level marks. If the oil is below the minimum level mark, add sufficient oil of the recommended type to raise it to the maximum level mark. NOTICE: Make sure that no foreign material enters the drive chain housing. [ECS00531] 1. V-belt 11. Install the drive guard, and then install the left side cover and the shroud. ESU12103 1. Maximum level mark 2. Minimum level mark Drive chain housing To check the drive chain housing oil level 1. Place the snowmobile on a level surface and apply the parking brake. 2. Remove the shroud and the right side cover. (See page 38 for removal procedures.) 3. Remove the dipstick, wipe it off with a clean rag, and then insert it back into the filler hole. Recommended drive chain oil: SAE 75W or 80W API GL-3 Gear oil 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Periodic maintenance and adjustment
53
9.
Rotate the secondary sliding sheave
clockwise and push it so that it separates
from the secondary fixed sheave.
10.
Install the V-belt between the secondary
sliding and fixed sheaves.
11.
Install the drive guard, and then install the
left side cover and the shroud.
ESU12103
Drive chain housing
To check the drive chain housing oil level
1.
Place the snowmobile on a level surface
and apply the parking brake.
2.
Remove the shroud and the right side
cover. (See page 38 for removal proce-
dures.)
3.
Remove the dipstick, wipe it off with a
clean rag, and then insert it back into the
filler hole.
4.
Remove the dipstick and check that the
oil is between the maximum and mini-
mum level marks. If the oil is below the
minimum level mark, add sufficient oil of
the recommended type to raise it to the
maximum level mark.
NOTICE:
Make
sure that no foreign material enters
the drive chain housing.
[ECS00531]
1.
Secondary sliding sheave
2.
Secondary fixed sheave
1. V-belt
1. Dipstick
1.
Maximum level mark
2.
Minimum level mark
Recommended drive chain oil:
SAE 75W or 80W API GL-3 Gear oil