2009 Yamaha Motorsports RS Vector GT Owners Manual - Page 44
2009 Yamaha Motorsports RS Vector GT Manual
Page 44 highlights
Periodic maintenance and adjustment ESU11740 Tool kit The owner's tool kit has the tools which are sufficient for most periodic maintenance and minor repairs. A torque wrench is also necessary to properly tighten nuts and bolts. 1. Fastener 2. Shroud 1. Tool kit ECS00360 To install the shroud Hook the end of the shroud onto the shroud stay, slowly lower it to the original position, and then tighten the fasteners. NOTICE Before starting the engine, make sure that the tool kit is properly seated in its holder and is securely fastened. TIP If you do not have a torque wrench available during a service operation requiring one, take your snowmobile to a Yamaha dealer to check the torque settings and adjust them if necessary. ESU12892 1. Shroud stay Left and right side covers To remove a side cover 1. Remove the shroud. (See the above procedure.) 2. Loosen the fasteners, and then remove the side cover. Removing and installing the shroud and covers EWS00091 WARNING Be sure shroud and covers are secured before operation. A loose shroud or cover could move and cause loss of control. Shroud To remove the shroud Loosen the fasteners, slowly raise the shroud, and then unhook the shroud from the shroud stay. 38