2009 Yamaha Motorsports RS Vector GT Owners Manual - Page 49

2009 Yamaha Motorsports RS Vector GT Manual

Get 2009 Yamaha Motorsports RS Vector GT PDF manuals and user guides View all 2009 Yamaha Motorsports RS Vector GT manuals

Page 49 highlights

Periodic maintenance and adjustment 2. Remove the headlight unit bolt on each side of the snowmobile. 7. Lift up the air filter element frame and check the air filter element. If there is any snow on the air filter element, remove the element, brush off the snow, and then install the air filter element. 1. Headlight unit bolt 3. Unfasten the plastic band around the wire harness. 1. Plastic band 8. 4. 5. Disconnect the cylinder head breather hose. Unhook the air filter case cover fasteners. Place the air filter element frame in the original position, and then install the air filter case cover. 9. Hook the fasteners onto the air filter case cover. 10. Connect the cylinder head breather hose. 11. Install the headlight unit, making sure to insert the projections on the headlight unit stay into the slots on the bottom of the headlight unit. 1. Cylinder head breather hose 6. Slightly lift up the headlight unit, and then remove the air filter case cover. 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Periodic maintenance and adjustment
43
2.
Remove the headlight unit bolt on each
side of the snowmobile.
3.
Unfasten the plastic band around the wire
harness.
4.
Disconnect the cylinder head breather
hose.
5.
Unhook the air filter case cover fasteners.
6.
Slightly lift up the headlight unit, and then
remove the air filter case cover.
7.
Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.
8.
Place the air filter element frame in the
original position, and then install the air
filter case cover.
9.
Hook the fasteners onto the air filter case
cover.
10.
Connect the cylinder head breather hose.
11.
Install the headlight unit, making sure to
insert the projections on the headlight
unit stay into the slots on the bottom of
the headlight unit.
1.
Headlight unit bolt
1.
Plastic band
1.
Cylinder head breather hose