2008 Yamaha Motorsports Apex M-TX Owners Manual - Page 55
2008 Yamaha Motorsports Apex M-TX Manual
Page 55 highlights
Periodic maintenance 2. Remove the headlight unit bolt on each side of the snowmobile and the bolts shown on the top cover. 1 . Locknut 2. Throttle cable free play adjusting bolt 3. Throttle cable free play 1 . Headlight unit bolt Throttle cable free play: 2.0-3.0 mm (0.08-0.12 in) 6. 7. Tighten the locknut. Connect the speedometer coupler and headlight couplers, and then install the headlight unit, making sure to insert the projections on the headlight unit stay into the slots on the bottom of the headlight unit. 1. Bolt 3. 4. 5. Disconnect the speedometer coupler and headlight couplers, and then remove the headlight unit. Loosen the locknut. Turn the adjusting bolt in or out until the specified throttle cable free play is obtained. 8. Install the headlight unit bolts, and then tighten them to the specified torque. Headlight unit bolt tightening torque: 3 Nm (0.3 m·kgf, 2.2 ft·lb) 9. Install the bolts on the top cover. 10. Install the shroud. 49