2008 Yamaha Motorsports Apex M-TX Owners Manual - Page 34

2008 Yamaha Motorsports Apex M-TX Manual

Get 2008 Yamaha Motorsports Apex M-TX PDF manuals and user guides View all 2008 Yamaha Motorsports Apex M-TX manuals

Page 34 highlights

Control functions Rebound damping setting: Minimum (soft): 22 click(s) in direction (a)* Maximum (hard): 0 click(s) in direction (b)* * With the adjustment dial in the standard position RX10RTR The compression damping force can be adjusted by turning the adjusting screw. To increase the compression damping force, turn the adjusting screw in direction (a). To decrease the compression damping force, turn the adjusting screw in direction (b). • Do not turn the adjusting screw in direction (b) more than 20 click(s). Even if the adjusting screw is continually turned after 20 click(s), there will be no change in the damping force. • Be sure to stop the adjusting screw at a position where there is a click. ESU11040 Adjusting the control rods The weight transfer can be adjusted by turning the control rod adjuster or adjusting nut. RX10R / RX10LT 1. Loosen the locknut. 2. Turn the control rod adjuster in direction (a) to increase weight transfer or direction (b) to decrease weight transfer. 1 . Compression damping force adjusting screw Compression damping setting: Minimum (soft): 20 click(s) in direction (b)* Standard: 11 click(s) in direction (b)* Maximum (hard): 1 click(s) in direction (b)* * With the adjusting screw fully turned lightly in direction (a) ECS00300 1 . Locknut 2. Control rod adjuster EWS00180 Never adjust the control rod beyond the range of the scale on the special wrench. 3. Check the control rod adjuster length using the scale on the special wrench included in the owner's tool kit as shown. Make sure that the rim of the control rod body is within the range of the scale. CAUTION: • Do not continue to turn the adjusting screw in direction (a) after it stops. The shock absorber can be damaged and damping force adjustments cannot be made. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Control functions
Rebound damping setting:
Minimum (soft):
22 click(s) in direction (a)*
Maximum (hard):
0 click(s) in direction (b)*
* With the adjustment dial in the
stan-
dard position
RX10RTR
The compression damping force can be ad-
justed by turning the adjusting screw.
To increase the compression damping force,
turn the adjusting screw in direction (a). To
decrease the compression damping force,
turn the adjusting screw in direction (b).
1.
Compression damping force adjusting
screw
ECS00300
CAUTION:
•
Do not continue to turn the adjusting
screw in direction (a) after it stops. The
shock absorber can be damaged and
damping force adjustments cannot be
made.
•
Do not turn the adjusting screw in direc-
tion (b) more than 20 click(s). Even if the
adjusting screw is continually turned af-
ter 20 click(s), there will be no change in
the damping force.
•
Be sure to stop the adjusting screw at a
position where there is a click.
ESU11040
Adjusting the control rods
The weight transfer can be adjusted by
turn-
ing the control rod adjuster or adjusting nut.
RX10R / RX10LT
1.
Loosen the locknut.
2.
Turn the control rod adjuster in direction
(a) to increase weight transfer or direction
(b) to decrease weight transfer.
1.
Locknut
2.
Control rod adjuster
EWS00180
Never adjust the control rod beyond the
range of the scale on the special wrench.
3.
Check the control rod adjuster length us-
ing the scale on the special wrench in-
cluded in the owner’s tool kit as shown.
Make sure that the rim of the control rod
body is within the range of the scale.
Compression damping setting:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned
lightly in direction (a)
28