2008 Yamaha Motorsports Apex M-TX Owners Manual - Page 36
2008 Yamaha Motorsports Apex M-TX Manual
Page 36 highlights
Control functions 3. Tighten the locknut while holding the control rod adjusting nut in place. Locknut tightening torque: 25 Nm (2.5 m·kgf, 18 ft·lb) ECS00310 CAUTION: • When using the two wrenches included in the owner's tool kit, make sure that they are situated at a right angle to the control rod as shown, and that they are tightly fitted to the locknut and the control rod adjusting nut. • The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. 30
Control functions
3.
Tighten the locknut while holding the
con-
trol rod adjusting nut in place.
Locknut tightening torque:
25 Nm (2.5 m·kgf, 18 ft·lb)
ECS00310
CAUTION:
•
When using the two wrenches included
in the owner’s tool kit, make sure that
they are situated at a right angle to the
control rod as shown, and that they are
tightly fitted to the locknut and the
con-
trol rod adjusting nut.
•
The left and right adjusting nuts must be
set to the same position. Uneven set-
tings can cause poor handling and loss
of stability.
30