2006 Polaris 600 Switchback Owners Manual - Page 91
2006 Polaris 600 Switchback Manual
Page 91 highlights
MAINTENANCE General Maintenance n Hydraulic Brake Inspection Inspect the brake lever reserve before each use of the snowmobile. See page 53. Brake pads must be replaced when the brake pad material becomes thinner than the backing plate (approximately 1/16″). A kit is available for replacing brake pads. See your dealer. WARNING Brake failure during operation can result in serious injury or death. Properly functioning brakes are vital to your safety. Be sure the brake pads do not drag on the disc and that brake lever travel is not excessive. Always replace brake pads when the brake pad material becomes thinner than the backing plate (approximately 1/16″). Brake Components 1. Brake Caliper 2. Brake Disc 3. Brake Pad Material (Replace when thickness is less than 1/16″/1.5mm). 3 1 2 Excessive Lever Travel Hydraulic brakes are self-adjusting, but if excessive brake pad clearance develops (see page 88), bring the machine to an authorized Polaris dealer for inspection and adjustment. 88