2006 Polaris 600 Switchback Owners Manual - Page 67
2006 Polaris 600 Switchback Manual
Page 67 highlights
OPERATION n Engine Stop Switch Push down on the engine stop switch (L) to ground out the ignition and stop the engine quickly. Pull the switch up to the ON position to allow restarting. n Throttle Safety Switch L The throttle safety switch is designed to stop the engine whenever all pressure is removed from the throttle lever and the throttle cable or valves do not return to the normal closed position. WARNING Operating the snowmobile with a faulty throttle safety switch can result in serious injury or death in the event of an accident. If the throttle safety switch does not shut off the engine during a throttle system malfunction, immediately push down the engine stop switch. Do not start the engine again until the malfunction has been corrected by your dealer. Test the throttle safety switch L system daily before operation. 1. Sit on the seat. 2. Start the engine and allow it to idle. 3. Hold the throttle lever pin stationary by exerting pressure on the pivot pin in the direction shown in the illustration (L). 4. Apply a slight amount of throttle. A properly functioning switch must shut down the engine. 64