1998 Oldsmobile Bravada Owner's Manual - Page 91

Turn and Lane Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished. the lever will return automatically. An arrow on the instrument panel will flash i n the direction of the turn or lane change. I f you have a trailer towing option with added wiring for the trailer lamps, a different turn signal flasher is used. With this flasher installed, the signal indicator will flash even if a turn signal bulb is burned out. Check the front and rear turn signal lamps regularly to make sure they are working. Turn Signal On Chime I f your turn signal is left on for nwre than 3/4 of a mile ( I .2 km), a chime will sound at each flash of the turn signal. To turn off the chime., move the turn signal lever to the off position. Headlamp High/Low Beam Changer To signal a lane change, just raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. As you signal a turn or a lane change, if the arrows don't flash but just stay on, a signal bulb may be burned out and other drivers won't see your turn signal. To change the headlamps from low to high beam or high to low beam. pull the multifunction lever a11 the way toward you. Then release it. When the high beams are on, this indicator light on the instrument panel will also be on. If a bulb is burned out, replace it to help avoid an accident. If the arrows don't go on a t all when you signal a turn, check the fuse (see "Fuses and Circuit Breakers'' i n the Index) and for burned-out bulbs.