1994 Oldsmobile Silhouette Owner's Manual - Page 49

remote lock control transmitter, or lock it manually by turning thelock counterclockwise. With this feature you can unlock all of the doors from the outside by holding the ltey in theunlock position for one second. To unlock only the driver's or passenger's door, turn thekey to the unlock position and release. From the inside, whenthe ignition is on and the driver's door is closed, all doors will lock each time you move the shift lever out of P (Park). If the passenger door orthe liftgate are openwhen you move the shift lever out of P (Park), they will lock when closed. If the sliding door is open when you move the shift lever out of P (Park), a lock delay feature allows the sliding door to lock five seconds after it is closed. All other doors will lock again, too. With the automatic doorloclts feature, you can still lock or unlock the doors at any time, either manually or with the power door lock switches. Overriding Lock Delay To override the lock delay feature, press the front of the power door loclts switch (the unlock position) while the shift lever is in P (Park). If you have the remote lock control system, there are three additional ways you can disable the loclt delayfeature (see Remote Lock Control later in this section) : Press the unlock symbol on your remote transmitter, Return the shift lever to P (Park), or Turn the ignition off. Customizing Your Automatic Door Locks Feature With the remote lock control system you can customizeyour automatic door loclts feature to suityour individual needs. (See Remote Lock ControZ later in this section.) With the doors closed and the ignition on, press and hold the driver's power door lock switch in the lock position for ten seconds. The doors lock, then will unlock, indicatingthat you have ten seconds in which to program one of four custom modes. To program the automatic doorloclts system to unlock only the driver's door when the shift lever is returned to P (Park), press the unlock symbol on your remote transmitter once. The driver's door will unlock, indicating that this mode has been successfully programmed. To program the automatic doorloclts system to unlock all doors when the shift lever is returned to P (Park): press the unlock symbol on your remote transmitteronce (the driver's door will unlock), thenpress the unlock symbol again. All doors will unlock, indicating that this mode has been successfully programmed. To program the automatic doorloclts system to leave all doors locked when the shift lever is returned to P (Park), press the lock symbol on your remote transmitter once.All doors will lock, indicating that this mode has been successfully programmed. To disengage the automatic door loclts system, press the lock symbol on your remote transmitter once (all doors will lock). Then press the lock symbol again. All doors will lock 47