1993 Oldsmobile Silhouette Owner's Manual - Page 58

Features & Controls I 56 If your vehicle is parked on a 20" or steeper grade, the door latch may not be able to hold the door in the full open Power Sliding Door (CONK) position. If the sliding door override If anything obstructs the sliding door switch is in the ON position, the door while it is closing, the door will will close under the control the power of automatically reverse to the open door system. If the override switch is in position, provided it meets sufficient the OFF position, the door will close resistance. Resistance must be as strong To manually open the power sliding without power assistance. as the forceof the closing door,or door when the sliding door override To manually close the power sliding stronger. The forceof the closing door switch is in the ON position, pull the door when the sliding door override increases significantly as the door inside or outside latch release and let approaches the latch position. go; the door will open fully and remain switch is in the ON position, pull the inside or outside latch release the or latched in the open position. edge of the door. Move the door about To manually open the power sliding two inches toward the closed position door when the override switch in the and release. The doorwill close is You or others could be injured OFF' position, pull the inside outside completely and latch for you. or - if caught in the pathof the latch release and slide the doorl the al sliding door. Make sure the door To manually close the power sliding way back to the latch position. path is clear before closing the door when the override switch in the is door. OFF position, pull the insideor outside latch release and slide the door all the way forward to the latch position.