2010 BMW X5 Owner's Manual - Page 80

Everything under control Hiding Check Control messages Displaying stored Check Control messages 1. "Vehicle Info" 2. "Vehicle status" 3. "Check Control" Press the button in the turn signal lever up or down. Some Check Control messages are displayed until the malfunctions have been rectified. They cannot be hidden. If a number of malfunctions occur simultaneously, they are displayed in succession. Other messages are automatically hidden after approx. 20 seconds, but remain stored. 4. Select the text message. Speed limit You can enter a speed and a Check Control message indicates when you have reached this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area. You are only warned of reaching this speed a second time if your vehicle speed falls below it again by at least 3 mph/5 km/h. Displaying stored Check Control messages Displaying, setting, or changing speed 1. "Settings" 2. "Speed" 1. Press the button on the turn signal lever downward. "CHECK OK" or the stored Check Control messages appear in the display. "CHECK OK" is shown if no messages are present. Check Control messages are accompanied by text messages on the Control Display. 2. Press the button to display additional messages, the time and outside temperature, or the date. 3. "Warning at:" 4. Turn the controller until the desired limit is displayed. 5. Press the controller. The speed limit is stored. 78 Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG