2010 BMW X5 Owner's Manual - Page 256

Replacing components Have work on the xenon light unit including changing the bulb carried out only by your BMW Sports Activity Vehicle Center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Due to the high voltage present in the system, there is a danger of fatal injuries when work is carried out improperly.< Side marker lamps 5-Watt bulb, WY5W XLL 1. Rotate the bulb holder to the left and remove. Parking lamps and roadside parking lamps, daytime driving lamps 35-Watt bulb, H8 The bulb is pressurized. Therefore, wear safety glasses and protective gloves. Otherwise there is a danger of injuries if the bulb is accidentally damaged during replacement.< 1. Turn the cover to the left and remove. 2. Pull the bulb out of the bulb holder and replace. 3. Install in the reverse order. Turn signals, front 24-Watt bulb, PY24W 1. Rotate bulb holder to the left and remove it along with the bulb. 2. Left side of vehicle: Rotate the bulb holder to the right, refer to arrow, and remove. Right side of vehicle: Rotate the bulb holder to the left and remove. 2. Rotate the bulb to the right along with the socket and replace. 3. Install in the reverse order. Tail lamps > Turn signals, backup lamps: 21-watt bulb, H21W > Brake lamps, brake force display: 21-watt bulb, P21W 3. Disconnect plug and replace bulb. 4. Install in the reverse order. > Rear lamp: LED technology. In case of a defect, please go to a BMW Sports Activity Vehicle Center or a workshop that works according to BMW repair 254 Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG