2010 BMW X5 Owner's Manual - Page 48
2010 BMW X5 Manual
Page 48 highlights
Adjusting 3. Press the button: The LED in the button lights up. 4. Press the desired memory button 1 or 2: the LED goes out. The positions of the driver's seat, the exterior mirrors, and steering wheel are stored for the remote control currently in use. The adjusting procedure is canceled if you briefly press a seat-adjusting switch or one of the memory buttons. Selecting automatic activation 1. "Settings" 2. "Door locks" 3. "Last seat position auto." Activating Do not activate the memory function while the vehicle is moving. There is a risk of accident from unexpected movement of the seat or steering wheel.< Comfort mode 1. After unlocking, open the driver's door or switch on radio readiness, refer to page 59. 2. Briefly press the desired memory button 1 or 2. The adjusting procedure is canceled if you briefly press a seat-adjusting switch or one of the memory buttons. The function for automatically recalling the last seat position is switched on and is stored for the remote control currently in use. Deactivating automatic recall Deactivate "Last seat position automatic". Safety feature 1. Close the driver's door and switch the ignition on or off, refer to page 59. 2. Press the desired memory button 1 or 2 and maintain pressure until the adjustment process has been completed. If the button was pressed inadvertently: press the button again; the LED goes out. Head restraints A correctly adjusted head restraint reduces the risk of spinal injury in the event of an accident. Adjust the head restraint so that its center is approx. at ear level. Otherwise there is increased danger of injury in the event of an accident. Only remove the head restraints if the respective seat is not occupied. Reinstall the head restraints before transporting passengers, as otherwise the head restraint cannot provide its protective function.< Activating with the remote control The driver's seat position last set is stored for the remote control currently in use. You can select whether or not the seat is reset to that position automatically. When using this feature, always make sure that the footwell behind the driver's seat is empty and unobstructed. Failure to do so could cause injury to persons or damage to objects behind the seat as a result of a rearward movement of the seat.< Height Adjust the head restraint so that its center is approximately at ear level. Distance Adjust the distance so that the head restraint is as close as possible to the back of the head. 46 Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG