2010 BMW X5 Owner's Manual - Page 44

Opening and closing 2. Within about 4 seconds, slide the switch forward again beyond the resistance point and hold it there. The roof closes without the pinch protection system. 3. Release and disconnect the motor plug. This significantly reduces the effort required for the manual movement. Following interruptions in electrical power supply After a power loss, the sunroof may only respond to the raise command. Then have the system initialized. BMW recommends having this work carried out by your BMW Sports Activity Vehicle Center. Moving manually* In the event of an electrical malfunction, you can move the sunroof manually: 1. Remove trim piece. To do so, gently lift the corner of the trim piece with a screwdriver. 4. Take the Allen wrench* from its bracket in the onboard tool kit, refer to page 250, and insert it into the opening provided. Move the glass sunroof in the desired direction. 5. Reconnect the plug. 2. Using the screwdriver, press in the clamps one after the other, arrows 1, tilt the cover panel down, arrow 2, and remove. 6. Clip the trim piece into the cover panel, arrow 1. Then fold the cover panel forward until it audibly clicks into place, arrow 2. 42 Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG