Zanussi ZOD35802XK User Manual - Page 20
Energy Efficiency
View all Zanussi ZOD35802XK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
WHAT TO DO IF... Problem Possible cause Remedy You cannot activate or operate the oven. The display shows "400" and an acoustic signal sounds. The oven does not heat up. The oven does not heat up. The oven does not heat up. The oven does not heat up. The lamp does not operate. Steam and condensation settle on the food and in the cavity of the oven. The display shows "12.00". The oven is incorrectly connected to an electrical supply. The oven is deactivated. The clock is not set. The necessary settings are not set. The fuse is blown. The lamp is defective. You left the dish in the oven for too long. There was a power cut. Check if the oven is correctly connected to the electrical supply (refer to the connection diagram if available). Activate the oven. Set the clock. Make sure that the settings are correct. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Replace the lamp. Do not leave the dishes in the oven for longer than 15 - 20 minutes after the cooking process ends. Reset the clock. SERVICE DATA If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. Do not remove the rating plate from the appliance cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) ENERGY EFFICIENCY ... PRODUCT FICHE AND INFORMATION ACCORDING TO EU 65-66/2014 Supplier's name Zanussi Model identification ZOD35802BK ZOD35802XK 20