Zanussi ZOD35802XK User Manual - Page 18

• Clean the appliance interior after each use. Fat accumulation or other food remains may result in a fire. The risk is higher for the grill pan. • Clean stubborn dirt with a special oven cleaner. • Clean all accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent. • If you have nonstick accessories, do not clean them using aggressive agents, sharp-edged objects or a dishwasher. It can cause damage to the nonstick coating. STAINLESS STEEL OR ALUMINIUM APPLIANCES Clean the oven door with a damp cloth or sponge only. Dry it with a soft cloth. Do not use steel wool, acids or abrasive materials as they can damage the oven surface. Clean the oven control panel with the same precautions. REMOVING THE SHELF SUPPORTS To clean the oven, remove the shelf supports. 1. Pull the front of the shelf support away from the side wall. 2. Pull the rear end of the shelf support away from the side wall and remove it. 1 2 Spots or discolouration of the catalytic surface have no effect on catalytic properties. WARNING! Keep children away when you clean the oven at a high temperature. The oven surface becomes very hot and there is a risk of burns. CAUTION! Always turn the oven light on while using the catalytic cleaning (if applicable). Before activating the catalytic cleaning remove all the accessories from the oven. The walls with a catalytic coating are self-cleaning. They absorb fat which collects on the walls while the appliance operates. To support the self-cleaning procedure, heat the empty oven on a regular basis. 1. Clean the oven floor with warm water and washing up liquid, then dry it. 2. Set the function if applicable. If not, set . 3. Set the temperature to 250ºC and let oven operate for 1 hour. 4. When the appliance is cool, clean it with a soft and moist sponge. REMOVING AND INSTALLING THE DOOR You can remove the door and the internal glass panels to clean it. The number of glass panels is different for different models. WARNING! Be careful when you remove the door from the appliance. The door is heavy. 1. Open the door fully. 2. Fully lift up the clamping levers (A) on the two door hinges. Install the shelf supports in the opposite sequence. CATALYTIC CLEANING CAUTION! Do not clean the catalytic surface with oven sprays, abrasive cleaning agents, soap or other cleaning agents. This will damage the catalytic surface. A A 3. Close the door until it is at an angle of approximately 45°. 18