Xerox P8EX Spire CXP8000 Color Server - User Guide - Page 360

346 Chapter 7 - Color Workflow The Contrast option is generally used to make last-minute adjustments to the print job after proofing. Note: Changing the contrast level for an RTP job, does not require re-RIPing of the job. ¾ To select a contrast level for the print job, move the Contrast slider to the required contrast level (the range starts from Less - which applies 10%, to More - which applies +10%). Note: When you set the slider to Normal, no change is applied. Color Tools Profile Manager The Profile Manager enables you to import and delete source and destination ICC profiles, and map destination profiles to specific paper colors. Source profiles are used to emulate other devices, or color spaces. You can import source CMYK or RGB profiles. To use a profile in a job, in the Job Parameters window, select Color>RGB workflow or Color>CMYK workflow>Emulation, depending on the profile you imported. Note: Custom source RGB profiles are not available in the CSA emulation mode. For more information about selecting a source profile in a job, see RGB Workflow on page 333 and CMYK Workflow on page 334. Destination profiles define the color space of your printer and are based on the combinations of paper and toner that you are using. For different paper stocks, you need different destination profiles. Each custom destination profile will be used with coated and uncoated paper. To use a different destination profile in a job, in the Job Parameters window, select Color>Destination profile. For more information about selecting a destination profile in a job, see Destination Profile on page 338.