Xerox P8EX Spire CXP8000 Color Server - User Guide - Page 252

238 Chapter 6 - Production Printing • Creep out is used when you find that the page images are too close to the spine. This problem can be resolved by selecting a value for Creep out. This will move all the pages of the job further out towards the outside margin (away from the spine) by the specified amount. This movement takes place before the Creep in value is applied. To set the creep options: 1. In the Creep in area, select Auto to automatically set the Creep in based on paper stock weight Or: Type the desired amount for Creep in. 2. In the Creep out area, type the desired amount. Note: Units of measurement (mm or inches) are set in the Settings window, see Localization on page 409. Imposition Templates There are three types of templates you can use in the Spire CXP8000 color server: • Collating templates, see Collating Templates on page 239 • Predefined imposition templates, see Spire CXP8000 Color Server Predefined Imposition Templates on page 239 • User defined imposition templates, see User Defined Imposition Templates on page 245